Custom Built 10 meter or 6 meter
General Electric MASTR II Repeaters
by Repeater Builder
 

GE MASTR II



10 meter & 6 meter models
GE MASTR II low-band mobile converted to 10 Meter or 6 Meter repeater.
Items supplied with basic repeater:
Description:
This is a conversion of a mobile radio to repeater.  The lock is removed and the receiver RF connection takes the place of it.
A length of heavy duty #10 siamese wire (red/black) is supplied for the power cord.  A variety of interface options (DB-9, plain old wire tail, barrier terminal block) are available for connecting an outboard controller.  This repeater can also be build to include a NHRC internal controller.  The addition of a NHRC-X/M2 controller makes a really nice package as everything is built internally and the repeater basically becomes 'plug-n'play'.  No duplexer is supplied.

The repeater will require a 35 amp Linear Power supply or equivalent just to run the repeater.  If an add on RF Power Amp is going to be used, please allow for the additional current consumption accordingly.  Astron's are good because of their over-voltage protection.  We don't recommend switching supplies on repeaters.

The information in these sites would be used to convert the radio to full duplex:
The Step-By-Step GE MASTR II Conversion Site.
GE MASTR II Infosite.

Price:
All sales subject to the Terms outlined in this linked page.
Options: (If you don't see your option listed here, e-mail us for pricing and availability!)
  • Temperature Compensated channel ICOM's for TX and RX from Bomar, add $75.00 
  • Link-Comm RLC-MOT MICOR noise squelch board, installed and configured, add $125.00
  • NHRC-3+/M2 controller w/voice, installed, add $190.00
  • NHRC-4/M2 linking controller installed, add $190.00
  • Additional controllers / controller connections available upon request
  • If CTCSS is desired, an optional Com Spec TS-64DS is available to be installed and set up to filter the tone on repeat audio and encode on the repeater transmitter, add $75.00  A TS-32 option is available for those who don't need Reverse Burst, add $50.00

  • We also convert user supplied radios.
    You can deduct $50 from the stated price of the repeater as referenced above if you ship your working radio (with ICOM's) to us for conversion.


    Thanks for your interest in our custom built repeaters.  Let us know if we can help you out.

    Contact:
    Scott @ (814) 444-9460
    (Weekdays during normal business hours)

    or email Scott at:
    Email Scott

    Copyright ©   2001-2008  W3KKC
    Last updated: 2/27/08 MSZ