Items supplied with basic repeater:
• Radio for conversion (please e-mail for availability)
• Duplex modification.
• Receiver and Exciter converted and tuned.
• Crystals installed on your frequency.
• Separate receiver antenna port. (SO-239 Pigtail out of the back of the radio)
• Heavy DC Power Cord supplied. (~3 foot length)

Items not supplied with basic repeater but are available as options:
• MICOR squelch board.  (Add a MICOR noise squelch to the MASTR II.)
• Can be built with the NHRC-4/MVP controller.
• PL (CTCSS) encode and decode available with optional Com-Spec TS-64DS.
• OEM and Aftermarket Preamp

Price:
• Labor to convert your Custom MVP Mobile to a basic repeater $400.00

All sales subject to the Terms outlined in this page.

We also convert user supplied radios.
You can deduct $100 from the stated price of the repeater as referenced above if you ship your working radio (with ICOM's) to us for conversion.

Options:
• Temperature Compensated channel ICOM's for TX and RX from Bomar, add $75.
  This option suggested for commercial service
• Link-Comm "MICOR" Dual-stage noise squelch option, add $75.00
• NHRC-4/MVP linking controller installed, add $190.00
• CTCSS, an optional Com Spec TS-64DS is available to be installed and set up to filter the tone on repeat audio and encode on the repeater transmitter for an additional $75.00 when the NHRC-4/MVP Controller is used.

Usage Notes:
• The MVP will not survive continuous duty at 20 watts, but for a temporary or portable repeater will likely be OK.
• These Repeaters can be used at reduced power as drivers for add on power amps.

Copyright ©   2001-Present  W3KKC

Last updated: 11-19-07 MSZ