Back to Home   Technical Information on    

[NHRC REPEATER CONTROLLERS]
Maintained by Kevin Custer W3KKC
Click here or on the logo above to go to the NHRC website
Also go to the Hamtronics website for manuals
on current and retired/obsolete products.

Click Here for the NHRC Factory Supported email list

Subscribe to the NHRC - Non Factory List


Modification Articles for NHRC Controllers

. A feature comparison chart of the various NHRC controllers   (offsite link)
. PL and the NHRC-2 or NHRC-3 Controllers   A modification for allowing a PL decoder to be used.   by Kevin Custer W3KKC
. PL and the NHRC-4 Controller   A modification for allowing an active-high PL decoder to be used.   by Kevin Custer W3KKC
. PL only during COS with the NHRC-3/M2 and the TS-64   Allowing keyed encode with reverse burst   by Kevin Custer W3KKC
. PL only during COS with the NHRC-4/M2 and the TS-64   Allowing keyed encode with reverse burst   by Kevin Custer W3KKC
. PL only during COS with the NHRC-4 and the ST-139   A GIF image showing keyed encode with reverse burst   by Eric Vincent VE2VXT.   See next file.
. PL only during COS with the NHRC-4 and the ST-139   A PDF version showing keyed encode with reverse burst   by Eric Vincent VE2VXT.   See previous file.
. A COR inverter (local copy)     Original location at the NHRC web site   Some of the controllers (like the NHRC-5) do not offer a low-going COR signal imput (i.e. they only accept a high-true input). This circuit, when placed in front of the controller, will fix that.


Back to the top of the page
Back to Home

This page originally posted on 11-Dec-2006

This web page, this web site, the information presented in and on its pages and in these modifications and conversions is © Copyrighted 1995 and (date of last update) by Kevin Custer W3KKC and multiple originating authors. All Rights Reserved, including that of paper and web publication elsewhere.