WB6JHQ REPEATER CONTROLLER
                          
                          
        This Repeater Controller uses the common 6802 Microprocessor,
        6821 PIA, 2764 Eprom, and the SSI-202P 5 volt DTMF decoder.
        These are readily available parts and are inexpensive too!
        This circuit design has been in use for eight years in the
        WB6ELR Repeater and the WB6GGL Repeater known as the Mount
        Baldy Machine. Still in use on many So.Cal. Repeaters.

       Features and Services Provided:

        1. Touch tone decoder on board.
        2. Remotely adjustable timers.
        3. Remote timer enable/disable.
        4. Remote reset circuit.
        5. Morse Code Identifier.
        6. Remote Base Code with Responses.
           Up to 6 repeaters may be connected with optional Hub controllers
           if using WB6JHQ Ten Channel Audio Mixers.
        7. LED Indicators.
        8. Source Code and Documentation.
        9. Common and easy to find parts should repair be needed.
       11. Initial Eprom programming free with unit.
       12. Source Code and Cross-Assembler.
       13. Size. 4" by 6" board.
       14. Quality circuit board, through plated, solder masked,
           with component layout.