product    
Communications Index
Two-way Radio FAQ
Guide to Scanners
Guide to Racing Scanners
Guide to Trunking Scanners
Scanner FAQ
Guide to Shortwave Radio
Shortwave Radio FAQ
 

 190-1120 HTX-202 2-Meter FM Handy Transceiver

Question: I get an E-2 error on my display.
Answer: This indicates that the Phase Loop Lock (PLL) has come unlocked. The radio should be taken in to your local RadioShack store for repair; they will send it to the nearest Service Center.

Radio Communications FAQ Index
 

Question: Why can't I get to a repeater?
Answer: To operate with a repeater, you must transmit on the repeater's input frequency and receive on the repeater's output frequency. If you frequently use a repeater that does not have a 600 kHz offset, we recommend you program the repeater frequency into one of the transceiver's memories.

You can override the default offset for each memory.

To change the default offset, follow the steps in "Understanding the Configuration Menu." to display the oS menu item, and rotate TUNE to change the offset. The transceiver lets you set the offset to be in the range from 0 MHz to 4 MHz in steps as set by the frequency step option.

UNDERSTANDING THE CONFIGURATION MENU

Your transceiver has a configuration menu that lets you modify operation settings. Each of the following sections explain how and when to use each configuration menu and select options.

Radio Communications FAQ Index
 

Question: Is there additional information available on-line?

Answer:
Additional information is available on our on-line support page for this product.

Amateur Radios FAQ Index


About RadioShack Corporation | Contact Us | Privacy Policy | Store Locator

Copyright© RadioShack Corporation 2004. All rights reserved.